RMS Stator (Honda)

Brand new stator

• You must re-install your original grommet and the new connector (see picture).
• Once your connector and grommet is re-installed, our part becomes a Plug-and-play unit, direct fit, and very easy to install.
• Highest grade of lamination materials
• Highest grade of copper winding, resistant to 200 degrees Celsius.
• All product shipped are tested

We have even included the opposite connector (main harness side) as we know these are often melted/corroded/defective and a major cause for repetitive electrical issues.

*All item pictures are accurate; if in doubt do not hesitate to compare our item to your original part.

Specifications:

Dimensions:
Interior diameter : 53 mm
Exterior diameter : 115 mm
Thickness : 16 mm
Length of wires stator to terminals: 875 mm

Other specifications:
Number of wires : 6
Number of terminals : 6

Wire to wire resistance:
Alternator : Between each Black = 0.9 ohms+/-20%
Alternator : Black to Ground =?O.L. ON DISPLAY
Source 1 : White to Blue = 9 ohms+/-20%
Source 2 : Blue to Green = 300 ohms+/-20%

Warning:

Battery condition is extremely important. No stator can work correctly with a bad or weak battery. Always fully charge your battery before performing any charging system tests or replacing parts. If there is any doubt, have the battery load tested or replaced.