RMS Kit Stator 100 W + Peakrpm CDI Box + Ignition Coil + Backplate + Flywheel + Puller (Yamaha)

Brand New Kit Stator + PeakRPM CDI Box + External Ignition Coil + Flywheel + Puller

• Direct replacement to your original unit
• Plug-and-play, direct fit, easy installation
• All shipped products are tested

*All item pictures are accurate, if in doubt, do not hesitate and compare our item to your original part.

High Output Stator

• Highest grade of lamination materials
• Highest grade of copper winding, resistant to 200 degrees Celsius
• Pick up pulsar coil included
• Connector included
• Rubber grommet included
• Adjustable timing plate to advance and retard up to 10 degrees included

PeakRPM CDI Box:

• Our PeakRPM CDI Box provides the optimal output for your ride
• Higher grade of electronic components

External Ignition Coil

• Highest grade of lamination materials
• Spark plug cap(s) included

Improved Stronger Magneto Flywheel Rotor
RMSTATOR is offering a new replacement flywheel with stronger magnetsfor your Banshee. This flywheel can be used as a direct replacement to the OEM.
We suggest combining it to our 100 or 200 watt stator as it will run the lights better in the lower rpm's.

Specifications:

Stator
Interior diameter : 40mm
Exterior diameter : 103mm
Thickness : 17mm
Length of wires stator to grommet : 150mm
Length of wires grommet to plug : 330mm
Length of pickup coil's wire to grommet : 270mm

Other specifications :
Number of wires : 6
Number of plugs : 3
Number of pins : 3

Wire to wire resistance :
Alternator : = Yellow to Black = 0.4 ohms +/-20%
Pickup : White/Green to White/Red = 115 ohms +/-20%
Source : Green to Red = 22 ohms +/-20%

Dimensions High Performance CDI Box:
Height: 25mm
Length: 87mm
Width: 71mm
Fixation holes center to center: 85mm

Other specifications:
Number of plugs: 2
Number of pins: 8

External Ignition coil
Distance between fixation holes: 90mm