Snowmobile Studs & Nuts

Features 6” of 60° carbide1/2” round bar with Flat-Top® designProvides safety and control for both studded and un-studded sledsSome skis may requir...

Features 4” of 60° carbide7/16” round bar with Flat-Top® designEntry-level carbide runner for lightly studded and un-studded sledsMade of Steel

A hardweld runner designed for extreme service or utility applicationsDouble bead of hardweld increases the depth of the runner for controllability...

May need to drill extra holes in skis

Stud patterns on Woody's® templates are CAD-designed to maintain track balanceFollow the instructions and you will have the highest level of precis...

WOODY'S 4"X 60 Turning 1 1/2" End Pad (ESI3-1040-1)

Stud patterns on Woody's® templates are CAD-designed to maintain track balanceFollow the instructions and you will have the highest level of precis...

A track clip tool that stands up to Woody's quality and durabilityTool can be used while track is still on sledOnly two-piece unitMade in the U.S.A.

Make sure the track's tension is within the manufacturer's guidelinesSet the weight and measure the tension of your track – follow recommendation o...

WOODY'S WEARBAR SLIM JIM2 6" C&A

WOODY'S WEARBAR SLIM JIM2 8" POL (S2P8-1300-1)

WOODY'S WEARBAR SLIM JIM2 4" POL

WOODY'S WEARBAR SLIM JIM2 4"

Available in 4", 6" and 8" of 60° carbide1/2" x 1/2" High quality and performance

Available in 4", 6" and 8" of 60° carbide1/2" x 1/2" High quality and performance

These 60° carbides reduce darting as they carve through existing grooves from single runners and spread the pressure across two points, extending t...

These 60° carbides reduce darting as they carve through existing grooves from single runners and spread the pressure across two points, extending t...

These 60° carbides reduce darting as they carve through existing grooves from single runners and spread the pressure across two points, extending t...

Features 6” of 60° carbide1/2” round bar with Flat-Top® designProvides safety and control for both studded and un-studded sledsSome skis may requir...

Features 6” of 60° carbide1/2” round bar with Flat-Top® designProvides safety and control for both studded and un-studded sledsSome skis may requir...

These 60° carbides reduce darting as they carve through existing grooves from single runners and spread the pressure across two points, extending t...

Features 6” of 60° carbide1/2” round bar with Flat-Top® designProvides safety and control for both studded and un-studded sledsSome skis may requir...

Features 4” of 60° carbide7/16” round bar with Flat-Top® designEntry-level carbide runner for lightly studded and un-studded sledsMade of Steel

Features 4” of 60° carbide7/16” round bar with Flat-Top® designEntry-level carbide runner for lightly studded and un-studded sledsMade of Steel

A hardweld runner designed for extreme service or utility applicationsDouble bead of hardweld increases the depth of the runner for controllability...

May need to drill extra holes in skis

Stud patterns on Woody's® templates are CAD-designed to maintain track balanceFollow the instructions and you will have the highest level of precis...

Track clip tool insert makes changing clips on a track with 3" lug height much easierMade in the U.S.A.

Requires indexing so edges run parallel with track's edge - a great re-torque indicatorFor all single and combination studding patternsMust be pare...

The ultimate push-through carbide studOne-piece stud/head design eliminates the need for T-nuts

For use in single-ply tracks and Grand Digger® Support PlatesThrough-hardened carbon steel with 60° carbide insertProper nuts included1.2" head wit...

For use in two-ply tracks and support plates

Dual stud mounting with more rigidity and less weight than two aluminum plates or comparable steel platesFor use with 5/16" push-through studs

All have extra-coarse threads giving Woody's™ Twist tire screws holding strength to stay in place season after seasonEasy removalAlso provide added...

For use in single-ply tracks and Grand Digger® Support PlatesThrough-hardened carbon steel with 60° carbide insertProper nuts included1.2" head wit...

Requires indexing so edges run parallel with track's edge - a great re-torque indicatorFor all single and combination studding patternsMust be pare...