Snowmobile Studs & Nuts
Filters
- 4 (1)
- 6 (1)
- 8 (1)
- 10 (1)
- 5/16" (17)
- 1" (9)
- 1.06" (1)
- 1.075" (7)
- 1.08" (7)
- 1.175" (3)
- 1.187" (5)
- 1.2" (5)
- 1.205" (1)
- 1.28" (2)
- 1.325" (10)
- 1.375" (5)
- 1.45" (7)
- 1.5" (4)
- 1.575" (6)
- 1.625" (4)
- 1.63" (2)
- 1.74" (1)
- 1.75" (1)
- 1.86" (2)
- 1.875" (2)
- 4.5" (3)
- 6" (3)
- 9" (3)
- 7mm (1)
- 13mm (1)
- 20mm (1)
- 25mm (1)
- .50" (1)
- .75" (3)
- .92" (2)
- .875" (6)
- Short (1)
- Tall (1)
WOODY'S Carbide Runner
WOODY'SWear Bar available Ace Dooly Executive Extender Trail III Hardweld Maverick Slim Jim 2.0 Standard Trail Blazer IV
WOODY'S Carbide Runner
WOODY'SWear Bar available Ace Dooly Executive Extender Trail III Hardweld Maverick Slim Jim 2.0 Standard Trail Blazer IV
STUD BOY Racer Teardrop Backer Plate
STUD BOYThese Backer Plates have been trimmed to eliminate weight and offer extra support to the rear of the stud. The domed profile provides greater effe...
View full detailsSTUD BOY G-Force Runner
STUD BOYOur bars are made to the highest standard in the industry. Large round host bars with virgin carbide inserts brazed to stay in place and hold an ed...
View full detailsSTUD BOY SPT Carbide Snow Stud
STUD BOYThe SPT carbide stud is designed for the rider who wants to ride safely with the extra confidence that only traction products provide. This stud is...
View full detailsSTUD BOY Deuce Bar Runner
STUD BOYThe ‘’Deuce’’ Bar takes dual type wearbars to a new level. Utilizing the design benefit of the original ‘’Shaper’’ Bars’ concave side, this new dua...
View full detailsSTUD BOY Super-Stock Runner
STUD BOYOur bars are made to the highest standard in the industry. Large round host bars with virgin carbide inserts brazed to stay in place and hold an ed...
View full detailsSTUD BOY Switch-Back Runner
STUD BOYOur bars are made to the highest standard in the industry. Large round host bars with virgin carbide inserts brazed to stay in place and hold an ...
View full detailsSTUD BOY Deuce Bar Runner
STUD BOYThe ‘’Deuce’’ Bar takes dual type wearbars to a new level. Utilizing the design benefit of the original ‘’Shaper’’ Bars’ concave side, this new dua...
View full detailsSTUD BOY Aluminum Power Plate Single Backer
STUD BOYThe “Power Plate” Backer is the industries best backer! This innovative shape provides great stud support and is almost unbendable. We added a radi...
View full detailsSTUD BOY SPT Carbide Snow Stud
STUD BOYThe SPT carbide stud is designed for the rider who wants to ride safely with the extra confidence that only traction products provide. This stud is...
View full detailsSTUD BOY Deuce Bar Runner
STUD BOYThe ‘’Deuce’’ Bar takes dual type wearbars to a new level. Utilizing the design benefit of the original ‘’Shaper’’ Bars’ concave side, this new dua...
View full detailsSTUD BOY Switch-Back Runner
STUD BOYOur bars are made to the highest standard in the industry. Large round host bars with virgin carbide inserts brazed to stay in place and hold an ...
View full detailsSTUD BOY G-Force Runner
STUD BOYOur bars are made to the highest standard in the industry. Large round host bars with virgin carbide inserts brazed to stay in place and hold an ed...
View full detailsSTUD BOY Super-Stock Runner
STUD BOYOur bars are made to the highest standard in the industry. Large round host bars with virgin carbide inserts brazed to stay in place and hold an ed...
View full detailsSTUD BOY Super-Stock Runner
STUD BOYOur bars are made to the highest standard in the industry. Large round host bars with virgin carbide inserts brazed to stay in place and hold an ed...
View full detailsSTUD BOY SPT Carbide Snow Stud
STUD BOYThe SPT carbide stud is designed for the rider who wants to ride safely with the extra confidence that only traction products provide. This stud is...
View full detailsWOODY'S 8" X 60 TURNING 1 1/2" END PAD (WYV-6580-1)
WOODY'SWoody’s most popular carbide4” turning carbide that has a sharp 60° edge angle for performance cornering; 1-1/2” carbide wear pads help extend runn...
View full detailsWOODY'S 6" X 60 TURNING 1 1/2" END PAD (TYV4-6500-1)
WOODY'SFeatures 6” of 60° carbide1/2” round bar with Flat-Top® designProvides safety and control for both studded and un-studded sledsSome skis may requir...
View full detailsWOODY'S 6" X 60 TURNING 1 1/2" END PAD (TAT4-9750-1)
WOODY'SFeatures 6” of 60° carbide1/2” round bar with Flat-Top® designProvides safety and control for both studded and un-studded sledsSome skis may requir...
View full detailsWOODY'S 8" X 60 TURNING 1 1/2" END PAD (WCA-5000-1)
WOODY'SWoody’s most popular carbide4” turning carbide that has a sharp 60° edge angle for performance cornering; 1-1/2” carbide wear pads help extend runn...
View full detailsWOODY'S ROUND SOCKET FOR COLORED WASHERS
WOODY'SAvailable in 5/16" sizeA unique tool used for driving locknuts down on push-through studsProvides the torque to tighten without touching the surfac...
View full detailsWOODY'S 6"X 60 TURNING 1 1/2" END PAD (TSD4-9350-1)
WOODY'SFeatures 6” of 60° carbide1/2” round bar with Flat-Top® designProvides safety and control for both studded and un-studded sledsSome skis may requir...
View full detailsWOODY'S STUD SHARPENING TOOL 60 DEGREES
WOODY'SEasy to useJust put the tool into a 3/8" drill chuck and sharpen studs while on the sled
WOODY'S SNO-CROSS CARBIDE RUNNER 10" C&A PRO SKI
WOODY'SCompetition-legal snocross wear bars; combined height of bar and carbide conforms to ISR rulesFeature 60° turning carbide and 5/8" bar thicknessSom...
View full detailsWOODY'S 6" X 60 TURNING 1 1/2" END PAD (TYV4-6580-1)
WOODY'SFeatures 6” of 60° carbide1/2” round bar with Flat-Top® designProvides safety and control for both studded and un-studded sledsSome skis may requir...
View full detailsWOODY'S 6" X 60 TURNING 1 1/2" END PAD (TAT4-9975-1)
WOODY'SFeatures 6” of 60° carbide1/2” round bar with Flat-Top® designProvides safety and control for both studded and un-studded sledsSome skis may requir...
View full detailsWOODY'S 8" X 60 TURNING 1 1/2" END PAD (WAT-9975-1)
WOODY'SWoody’s most popular carbide4” turning carbide that has a sharp 60° edge angle for performance cornering; 1-1/2” carbide wear pads help extend runn...
View full detailsWOODY'S 6"X 60 TURNING 1 1/2" END PAD (TSD4-8250-1)
WOODY'SFeatures 6” of 60° carbide1/2” round bar with Flat-Top® designProvides safety and control for both studded and un-studded sledsSome skis may requir...
View full detailsWOODY'S STUD SHARPENING TOOL 30 DEGREES
WOODY'SEasy to useJust put the tool into a 3/8" drill chuck and sharpen studs while on the sled
WOODY'S 6" X 60 TURNING 1 1/2" END PAD (TCA-5000-1)
WOODY'SFeatures 6” of 60° carbide1/2” round bar with Flat-Top® designProvides safety and control for both studded and un-studded sledsSome skis may requir...
View full detailsWOODY'S HARDWELD WEAR BAR (COMPOSITE ONLY) (HSY-6580-1)
WOODY'SA hardweld runner designed for extreme service or utility applicationsDouble bead of hardweld increases the depth of the runner for controllability...
View full detailsWOODY'S 4" X 60 TURNING 1 1/2" END PAD (DY4-6580-1)
WOODY'SThese 60° carbides reduce darting as they carve through existing grooves from single runners and spread the pressure across two points, extending t...
View full detailsWOODY'S HARDWELD WEAR BAR (COMPOSITE ONLY) (HSD-8250-1)
WOODY'SA hardweld runner designed for extreme service or utility applicationsDouble bead of hardweld increases the depth of the runner for controllability...
View full detailsWOODY'S HARDWELD WEAR BAR (COMPOSITE ONLY) (HSA-9750-1)
WOODY'SA hardweld runner designed for extreme service or utility applicationsDouble bead of hardweld increases the depth of the runner for controllability...
View full detailsWOODY'S 6" X 60 TURNING 1 1/2" END PAD (DY6-6580-1)
WOODY'SThese 60° carbides reduce darting as they carve through existing grooves from single runners and spread the pressure across two points, extending t...
View full details